Competency Training Courses

Training Courses Programs 2018

Public Training Porgram October 2018 to December 2018 Download

1 .Course Name: Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors

Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone who require a working level knowledge of pumps & compressors

Date: (Five (5) days Training)

Time : 3pm – 8pm

Venue: Abu Dhabi, UAE

Validity :

Pre-requisite: None

Cost:

 

2.Course Name: IWCF Drilling Well Control Level 2

Target Audience: This training is recommended for anyone who requires a Driller or Supervisor Well Control Certificate.

Date: (4 Days)

Time : 9am – 4pm

Venue: Abu Dhabi, UAE

Validity : 5 Years

Pre-requisite: None

Cost: AED 3500/per person

Course Name: IWCF Drilling Well Control Level 3

Target Audience: This training is designed for people in critical well control positions on drilling installations as well as onshore roles.

Date: (5 Days)

Time : 9am – 4pm

Venue: Abu Dhabi, UAE

Validity : 2 Years

Pre-requisite: Drilling Well Control Level 2

Cost: AED 4000/per person

 

3.Course Name: Heat Exchanger

Target Audience: Mechanical, Process, Planning & Vibration Engineers and Supervisors

Course Outcome: Protection & Corrosion problems in Industry

Date: Five (5) days Training)

Time : 8am-1pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 2, 850

Course Name : Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors

Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone require a working level knowledge of pumps & compressors

Course Outcome: The course will provide engineers and technicians with information for the optimal selection, operation and maintenance of positive displacement pumps specially piston pumps (duplex & triplex pumps) as well as positive displacement and dynamic compressors

Date: Five (5) days Training)

Time : 3 pm- 8pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 2, 850

 

3.Course Name: Boiler & Steam Turbine

Target Audience: The course will not only be of great benefit to operation & maintenance staff but also for inspection & process engineering personnel.

Course Objective: The course will also highlight the main operational troubles and how to be traced & rectified.

Date: (Five (5) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 2850/per person

Course Name: Process Safety Management

Target Audience: Operations Managers, Safety and Executive, Process Engineers, Safety and Mechanical, Environmental Management and Technicians

Course Objective: Perform day to day process safety management decision making and assess and manage plant risks at all stages.

Date: (Five (5) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 2850/per person

 

4.Course Name: Abnormal Management Situation

Target Audience: Process and Operation Engineers, Supervisor and all those employees who are relevant to attend the training.

Course Objective: Demonstrate the hazards associated with poor situational management

Date: (Two (2) Days)

Time: 8am to 2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 1900/ per person

 

5.Course Name: Process Control for Oil & Gas

Target Audience: Gas Plant Field Operators, Oil Station Operators, Control Room Operators, Production Process Supervisors, Gas Process Engineers, Instrument Technician, Supervisor and Process Control Engineers.

Course Objective: This course has been designed to provide training on essential components of a control system used in Oil and Gas plant.

Date: (Three (3) Days)

Time : 8am-2pm

Venue: Mussafah, Abu Dhabi, UAE

Cost: US $ 2, 250/per person

1.Oil, Gas, Process / Engineering

1          An Introduction to Process Plant Start-up & Troubleshooting

2          API 579 Fitness for Services (FFS) Evaluation of Pressure Vessels and Equipment

3          Basic Petroleum Technology

4          A Systems Approach To Maintenance

5          Basic of  Gas  Compression Dehydration/Conditioning

6          Autotronics Modern Automotive Technology/ Mechanics & Electronics

7          Basic on  Gas Compression  Principles/Dehydration/Conditioning

8          Basics on Dehydration / Desalting & Facilities operations

9          Basic Of Gas / Compression Flow Measurement / Calculation and Reporting

10        Bearing ,Lubrication & Gearboxes

11        Boiler Water Treatment & Steam Generation

12        Boiler Water Treatment & Desalination

13        Chemical Engineering for Non Chemical Engineers

14        CRU, Operation, Monitoring and Optimization Skills

15        Combustion Techniques

16        Diesel Engine Maintenance

17        Engineering Fundamentals

18        Offshore Structural Design

19        Offshore Structure Type

20        Emergency Shutdown System

21        Engineering Drawing , Codes And Standards

22        Fluid Mechanics

23        Flare and Relief Systems

24        Gas Turbine Operations for Operator

25        Gas Steam Turbine

26        Gas Production & Processing

27        Gas Sweetening & SRU Operation Skills

28        Gas Conditioning and Processing

29        Hydrogenation & in Process Reaction

30        Hydrocarbon Production Operation

31        High- Compression Diesel & Gas Engine Operation, Maintenances & Trouble Shooting

32        Industrial Gas Turbines Operation, Troubleshooting & Maintenance

33        Maintenance Planning & Scheduling

34        Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance

35        Natural Gas Conditioning and Processing

36        Natural Gas Handling Systems & Facilities

37        Optimization of Equipment / Utilities Operations Techniques

38        Oil Refining and Petrochemical Process Control Technology

39        Oil Movement Storage

40        Oil & Gas Field Operations

41        Oil-Water Separation.

42        Overview of the Oil & Gas Industry

43        Practical Process Control Engineering

44        Plant Operation, Commissioning & Start-Up

45        Petroleum Production Problems and Solution

46        Pneumatic Components and Circuits

47        Production Operations for Process Engineers

48        Predictive Maintenance

49        Preventive Maintenance & Troubleshooting of Rotating Machinery

50        Operations, Troubleshooting and Control of Pumps, Turbines & Compressors

51        Machine Alignment and Condition Monitoring

52        Reliability, Maintainability & Risk

53        Safe Isolation Of Process Plant Equipment

54        Sulphur Recovery and Trouble Shooting

55        Strength and Properties of Material

56        Safety in Process design

57        Shell & Tube Heat Exchanger: Mechanical and Thermal Design

58        Shutdown Planning & Turnaround Management

59        Supervisory Control & Data Acquisition (SCADA)

60        Steam Turbine & Hydrogen Generate

Maintenance

61        Strategic Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry

62        Quality Assurance Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry

63        Shaft Alignment and Vibration Analysis

64        The Technical and Economics of Water Flooding

65        Job Safety Analysis in the Oil and Gas industry

66        Transportation,  Marketing and Refining of Crude Oil and Its Refined Products

 

2.Mechanical & Design Engineering

1          API Pump Design and Selection

2          Augmentation of Power and Performances: Improvement Strategies for Gas Turbines and Combined Cycles

3          Boiler Operation & Maintenance

4          Boilers: Design, Operation, Control and Management

5          Basic Pumps Technology

6          Blowers, Compressors and Turbochargers: Operation, Troubleshooting and Maintenance

7          Centrifugal Compressor & Steam Turbine Design, Operation and Maintenance

8          Centrifugal Compressor: Maintenance & Trouble Shooting

9          Compressor  & Steam Turbine Technology

10        Centrifugal  Compressor : Maintenance and Failure Analysis

11        Control & Operation of Centrifugal Gas Compressor

12        Control Valve Maintenance, Operation & Valve Selection Techniques

13        Flow Measurements Techniques/ Meter Types and Selection

14        Fans & Blowers: Selection, Operation, Maintenance and Applications

15        Flow Measurement & Flow Meters

16        Fitness for Service (FFS) for Piping & Pressure Vessels

17        Fundamental of Refinery Catalytic Process

18        Gas Processing Treatment and Sulfur Recovery

19        Gas Turbine 1 : Operation Maintenance and Troubleshooting

20        Gas Turbines 11 : Design, Performance and Reliability

21        Gas Turbine 111: Advanced Engine Systems; Matching; Performance Deterioration and Recovery

22        Gas Turbine Protection: Inspection Control, and Monitoring

23        Gasoline Blending in Refineries

24        Gas & Steam Turbines Plants:Design, Performance and Monitoring

25        Heat Exchangers: Shell and Tube Heat Exchangers Design, Operation, Control and Troubleshooting

26        High – Compression Diesel and Gas Engines: Maintenance and Troubleshooting

27        Improving the Performance & Reliability of Fired Heater & Boiler

28        Machinery Failure Analysis and Troubleshooting

29        Modern Automotive Technology:{Autotroniucs}

30        Mechanical Seals Troubleshooting and Maintenance

31        Instrumentation and Control: Sensors, Actuators, and Industrial Applications

32        Steam Turbine Maintenance: Turbine ,generator, maintenance and troubleshooting

33        Plant Operation, Commissioning & Start-Up

34        Predictive Maintenance

35        Power and Desalination Plants: Based on Gas Steam Turbines

36        Piping and valves: Design, Construction, Operation, Protection and Integrity

37        Pipeline Fabrication and Maintenance

38        Process Equipment, Fired Heater, Air Cooler s, Heat Exchangers, Pumps, Compressors.

39        Process Plant Start up , Commissioning & Troubleshooting

40        Pumps and Compressors: Operation, Troubleshooting and Maintenance

41        Pumps Operation, Maintenance & Troubleshooting

42        Pumps & Compressors In-Service (Operation & Maintenance )

43        Pumps Technology for Juniors

44        Reliability, Maintainability & Risk

45        Refinery Process Operation, Control System &Troubleshooting

46        Refining Process and Petroleum Products

47        Refinery Equipments Operation and Troubleshooting

48        Rotating Equipment: Preventive and Predictive Maintenance

49        Surface Production Operation

50        Shell & Tube Heat Exchanger: Mechanical and Thermal Design, Troubleshooting and Maintenance

51        Trouble Shooting of Modern Refinery

52        Turbine Steam- Path Damages Troubleshooting

53        Valve Maintenance & Technology

54        Valves: Safety Relief Valves: Selection, Operation and Maintenance

55        Valve Types: Operation & Applications

56        Water Injection Process

57        Water treatment for plant utility , Off site & Cogeneration

 

3.Instrumentation & Control Engineering

1          Analytical Instrumentation

2          Automatic Process Control

3          Advanced Process Measurements Course

4          Advanced Microprocessor Based Power System Protection

5          Applied Electronics

6          Advanced DCS Operation

7          Advanced Process Control & Instrumentation

8          Anti-Surge – CCC For Operations

9          Anti-Surge – CCC For Control (for Instrument Tech)

10        Basic Instrumentation & DCS

11        Basics of Instrumentation

12        Basics of Sensors

13        Boiler Operation & Control

14        Control & Operation of Centrifugal Gas Compressor

15        Controllers & Control Loops

16        Control Valve Maintenance, Operation & Valve Selection Techniques

17        Distributed Control Systems (DCS)

18        (DCS) Troubleshooting

19        Flow Measurement & Flow Meters

20        Flow Measurement & Flow Meters

21        Fiscal and Allocation Metering

22        Introduction To Instrument and Control Engineering

23        Industrial Process Control

24        Industrial Valve and Actuators

25        Instrumentation and Control: Sensors, Actuators, and Industrial Applications

26        Oil Refining and Petrochemical Process Control Technology

27        Proportional + Integral +Derivative Control Action

28        Pneumatic System & Troubleshooting

29        Principles of Calibration

30        Principles of Control

31        Programmable Logic Controllers (PLC)

32        P.L.C Fundamental

33        Process Control Instrumentation

34        Reading P& ID

35        Supervisory Control & Data Acquisition (SCADA)

36        Sensors & Actuator and Process Control

37        Temperature, Pressure & Level Measurements

38        Valves: Safety Relief Valves: Selection, Operation and Maintenance

39        Valve Types: Operation & Applications

 

4.Industrial Engineering

1          Changing Challenges for the Operations Managers

2          Cost Accounting for Engineers and Technicians: A Managerial Emphasis

3          Creating Value through Operations Management and Supply Chains

4          Casting Technology

5          Engineering Economy

6          Fundamentals of metal cutting and High speed Machining

7          Foundations for Introducing and Implementing Total Productive Maintenance (TPM)

8          High speed Machining:

9          Introducing and Implementing Preventive Maintenance Programs

10        Just-In-Time & Lean Systems :Japanese Management in Comparison with Western Experience

11        Material Properties

12        Maintenance planning and Management

13        Manufacturing Technology

14        Manufacturing Processes

15        Managers Aiming for Zero Machine Breakdowns

16        New Orientations for Inventory Control & Management

17        Numerical Methods for Engineers

18        Operations and Master Production Scheduling

19        Planning and Controlling Operations and Supply Chains

20        Product Design and Development

21        Preventive Maintenance Planning, Metrics and Benchmarking

22        Quality Experts  Aiming for Zero Defect Products and Processes

23        Strategic Planning and Strategic Management

24        Seven Magnificent Tools  of Statistical Process Control (SPC)

25        Stochastic Processes and Queuing Systems

26        Systematic Approaches in Process Design, Analysis and Decision Making

27        Total Productive Maintenance (TPM) Implementation Steps and Process Improvement Tools

28        Use of Computerized Maintenance Management Systems  (CMMS ) for Maintenance Planning and Management

29        Welding Technology: Metallurgy Aspects, Safety, and Quality

 

5.Petroleum Reservoir And Drilling Courses

1          Advanced Well Control

2          Basic Reservoir Engineering

3          Basic Petroleum Engineering to non-Engineering staff

4          Carbonate Reservoirs

5          Cased Hole Log Interpretation/ Production Logging

6          Completion & Well Intervention

7          Coiled Tubing Operations

8          Drill String Design

9          Drilling & Work over Operations

10        Drilling Engineering and Well Planning

11        Environmental Reservoir in the Oilfield

12        Enhanced Oil Recovery

13        Flow Assurance

14        Field Monitoring

15        Geostatistics

16        High Temperature High Pressure Well

17        Horizontal Well Technology

18        Introduction to Completion Design

19        Open Hole Log Interpretation

20        Production Operations

21        Project Management in E&P in Oil and Gas Industry

22        Petroleum Production Problems and Solution.

23        Production Technology

24        PVT and Phase Behaviour of Reservoir Fluids

25        Production Logging and Reservoir Monitoring

26        Reservoir Engineering

27        Reservoir Management

28        Reservoir Characterization

29        Reservoir Simulation (Introduction)

30        Well Testing

31        Water flooding

32        Well Design and Completion

33        Well Composite, Construction Integrity & Completion

34        Work Over Planning and Well Servicing

35        Well Stimulation

 

6.Electrical Engineering

1          Analysis and Control of Industrial Processes

2          A.C. & D.C. Motor Applications (Level Basic)

3          Basic Machines (A.C. & D.C.)

4          Contents of the Grounding and Measuring Instrumentation Program

5          Conducting Safety Meeting

6          Distributed Control System (DCS)

7          Distribution Network Design and Planning

8          Electrical Equipment & Control Systems

9          Power Plant Performance Monitoring

10        Distribution Planning & Reliability Assessment

11        “UPS’ Installation ,Operation & Troubleshooting

12        The Grounding & Measuring Instrumentation Program

13        Substation Design

14        Underground Power Cable

15        Earthing and Bonding

16        The Cables

17        11KV/ 415 Operation of Electrical Equipment

18        Electrical  Safety

19        Electrical Equipment – Inspection

20        33 KV /11 KV Substation Operation

21        Distribution System Planning in Electrical Network

22        33 KV Substation Circuit Breaker  Maintenance

23        Electrical Power System Planning

24        Electrical Grounding

25        Electrical Inspection & Testing

26        Electrical Installations

27        Electrical Equipment – Installation & Testing

28        Electrical Power Systems Quality & Troubleshooting

29        Electrical Protection and Protective Relays

30        Electrical Safety

31        Electrical Safety and Hazardous Area Classification in the Petrochemical Industry

32        Electrical Transformers: Operation, Testing and  Maintenance

33        Electrical Equipment Installation, Maintenance & Troubleshooting

34        Electrical Protection and Coordination

35        Energy Saving and Power Factor Improvement

36        Fault Analysis in Power System

37        High Voltage Operational Safety for Engineers

38        Maintaining & Troubleshooting Electrical Equipment &Technicians(OSHA, NFPA & EN Standards)

39        M.V Switchgear

40        Modern Electric Power Systems: Generation, Transformation, Transmission, Distribution, Substation & Utilization: Design, Modeling, Analysis, Planning, Monitoring, Control, Maintenance & Troubleshooting

41        Operation & Maint. Of C.B. & Switchgear

42        Power Cables Characteristics& Applications

43        Power System Harmonics, Earthing and Power Quality

44        Practical Motor Protection, Testing, Control & Maintenance

45        Preventive & Predictive Maintenance for Overhead Lines

46        Principles of the Maintenance of Electrical Switchgear

47        Substation Operation and Maintenance Techniques

48        Transformer & Generator Protection, Testing & Maintenance

49        Power System Protection

50        Switchgear Operation and Maintenance

7.Civil Engineering

1          Advanced Structural Analysis

2          Advanced Mechanics of Materials

3          Advanced Steel Structure Design, Construction and Inspection

4          Advanced Structural Mechanics

5          Advanced Steel Structure Design and Construction

6          Advanced New Materials in Concrete Construction

7          Concrete Quality Control

8          Civil Engineering Skill for Non-Civil Engineers

9          Design and Construction of Steel Structure

10        Decision Making and Decision Tree Technique

11        Essential material for concrete construction and repair

12        Concrete Quality control

13        Matrix Analysis of Structures

14        Principal of Civil Engineering for Non-Civil Engineering

15        Reinforced Concrete I

16        Reinforced Concrete II

17        Risk Assessment and Decision Making for Petroleum Investment

18        Repair and Maintenance of the Reinforced Concrete Structure

19        Stability of Structures

20        Special Topics (Mechanics of Composite Materials)

21        Strength of Materials

22        Structural Steel Design (using AISC-Specifications)

23        Structural Mechanics for Architects

24        Structural Analysis for Architects

25        Structural Design for Architects

26        Supervising Master Thesis

 

8.Health, Safety & Environment

1          Accident Investigation / Reporting and Lessons Learn

2          ALARP  Assessment & Risk Based Decision Making

3          Availability, Reliability &b Maintainability

4          Advanced Emergency Respond

5          Awareness Of LSA, Ionizing & Non-Ionizing Radiation

6          Air Pollution Control

7          Basic Corrosion

8          Behavioural Safety Audits

9          Business Continuity Management

10        Cleaning of Drinking  Water System with Wessoclean

11        Change Management for Process Safety

12        Computer –Aided Safety Management

13        Chemicals Handling & Industrial Safety: Classification of Hazardous Materials & Their Impact on Human Health

14        Corrosion for Non Corrosion Engineers

15        Corrosion of Iron & Steel Structures

16        Design of Plant Operation: Normal & Recovery

17        Degermination and Disinfection with Wessoclean (Air Application)

18        Environmental Management System (EMS)

19        Energy Conservation and Management

20        Enterprise Safety Knowledge Management

21        Environmental System (ISO 14001)

22        Emergency Preparedness

23        Fundamentals of Non-Destructive Testing

24        Fault Tree Analysis / Event Tree Analysis

25        Failure Mode Effect Analysis

26        Fitness for Service

27        HSE Supervisory (Leadership) Training

28        HSE Management for Managers

29        Hazardous Area Classification

30        Handling Storage & Transportation of Dangerous Goods

31        Handling Hazardous Waste

32        Hazard Identification and Risk Control

33        HSE Excellence Leading For Supervisors

34        Human Factors Engineering

35        HAZOP Process Hazard Analysis for Supervisor

36        Health & Safety in the Workshop

37        Health & Safety in Engineering Projects

38        Health Safety & Environment

39        HSE & QMS Induction & Updates

40        Hazard Identification and Risk  Control For Senior Managers

41        Human Reliability Analysis

42        HSE-MS, HSE cases and Risk Management

43        Introduction To Safety Systems

44        Industrial Fire & Accident Prevention

45        Industry & Company Codes & Standards

46        Integrated HSE & QMS

47        Industrial Safety and Health: Working in a Healthy and Safe Environment

48        Industrial Behavior and Relations

49        IOSH Managing Safely

50        IEMA Associate Certificate in Environmental Management

51        Learn from Past Experiences: Accident / Incidents

52        Leadership of Hazard & Operability Study

53        Load Forecasting and Upgrade system

54        Loss Control

55        Management of Major Emergencies

56        Metallurgy for Non-Metallurgists

57        Maritime Incident Investigation & Root Cause Analysis

58        Major Emergency Management & Control

59        Operating Procedure

60        Oil & Gas Safety, Practices in Japanese Industry

61        Plant Safety Information Management Program

62        Process Shutdown & Relief Systems

63        Oil Spill Response, Modeling &Clean Up Course

64        Oil & Gas Safety, Practices in Japanese Industry

65        Pressure Hose Safety Course

66        Process Control & Safety Systems

67        Process Modeling & Simulation

68        Process Hazard Analysis , HAZOP Study for Team Leaders

69        Plant Safety Information Management Program

70        Process Control & Safety Systems

71        Preventing Human Error

72        Process Safety for Operation Safety Engineers

73        Qualitative & Quantitative Fault Propagation Analysis

74        Revalidating Process Hazard Analysis (PHA)

75        Risk Assessment within Production Operation

76        Root Cause Analysis

77        Review of Reliability Standards (IEC 61709)

78        Reliability Centered Maintenance

79        Risk Assessment & Management

80        Risk Management in Engineering Projects

81        Safety Cases & Risk Assessment

82        Safety Engineering Education

83        Safety Instrumented Systems

84        Safety Auditing

85        Safety Regulations

86        Safety Assessment for Supply Chain Production Systems

87        Safety Audit & Site Inspection

88        Safe Lifting & Materials Handling

89        Safety in the Oil & Gas Safety Industry

90        Oil & Gas Safety, Practices in Japanese Industry

91        Safety Engineering Education

92        Safety Instrumented Systems

93        Safe Transportation & PPE

94        Tutorial On HAZID, Safety Assessment Method, Hands-On Practice

95        Treatment of Municipal & Industrial Sewage Sludge

96        Waste Management & Chemical Handling

97        Workplace Risk Assessment & Safe Systems of Work

98        Waste Water Treatment

99        Working Safely in Hazardous Area

100      Waste Handling & Waste Treatment

101      What If Techniques

 

9.Incident Command System (ICS)

1          Application of HAZOP and What-If Safety Review

2          Conduct incident / Accident Analysis

3          Discussions, Understanding, and Applications of OSHA Standards

4          Design and Engineering of Safe Plant Operation

5          Human Engineering for Safe Plant Operation

6          Introduction to the Incident Command System

7          Incident Command System Organization

8          Incident Facilities

9          Incident Resource Management

10        Incident Command System Assignments

11        Learning from Past Experience Using Accidents Database

12        Managing Corporate Safety Knowledge for Improved Risk Management

13        Reliability-Centered Maintenance Practices

14        Safe Process Plant Design Using Activity MO

15        Self-Assessment and Auditing of HSE Management System

16        Systematic Approach for Incident and Accident Analysis

17        Understanding & Implementation of HSE Management System

18        Understanding and management of Safety Interlock Systems

 

10.Corrosion Courses

1          Asset Integrity Management in Oil & Gas Industries

2          Cathodic Protection Systems

3          Corrosion Awareness

4          Corrosion for Non-Corrosion Engineers

5          Corrosion Metallurgy & Failure Prevention

6          Corrosion in the Oil & Gas Industry

7          Corrosion Monitoring & Inhibitor Injection in Oil & Gas Fields

8          Corrosion Control in Refining Industry

9          Corrosion Control in Boiler & Steam Generation Systems

10        Corrosion Prevention in Oil & Gas Industry

11        Corrosion of Reinforcing Steel and Reinforced Concrete

12        Corrosion Resistant Painting, Coating and Lining

13        Fundamentals of Industrial Coatings & Non-Metallic materials application in Chemical & Petrochemical Industries

14        Material Selection for Oil & Gas, Refineries and Desalination Plants

15        Integrity Management in Oil & Gas Industries

16        Microbiological Corrosion in Oilfields

17        Protective Coatings for Steam & Gas Turbine

18        Corrosion Inhibition Principles & Management

11.Management Development Courses

1          Advanced Methods for Time and Cost Control of Project

2          Appraisal Training

3          Assessor Training

4          Basics of Business Writing Skills

5          Behavioural Interviewing For Performance Management

6          Behavioural Interviewing for Recruitment, Appraisal, and Counselling

7          Coaching and Appraisal

8          Coaching & Mentoring

9          Competencies Management

10        Creative & Innovative Leadership

11        Creativity and Mind Mapping

12        Conflict Management

13        Communication, Negotiation and Presentation Skills

14        Communication & Dealing with Others

15        Counseling Skills For HR Professionals

16        Critical Competencies for Administrators and Secretaries

17        Customer Focus

18        Contract & Vendor Management

19        Customer Service

20        Competitive Intelligence & Benchmarking

21        Development Training for Executive Assistants

22        Effective Meeting & Time Management

23        Effective Thinking & Planning Strategies

24        Excellence in Internal and External Customer Service

25        Effective Performance Appraisals and successful Implementation

26        Estimating Techniques for Engineering Projects

27        Enhancing Leadership Skills

28        Emotional Intelligence

29        Effective Communication and Interpersonal Skills

30        Effective Presentation Skills

31        Experiencing NLP

32        Fundamentals of Human Resources Management

33        Human Resource Management for Women

34        Human Performance Management

35        Interviewing for Recruitment, Appraisal & Performance Counselling

36        Innovation and New Techniques in HR Management

37        Interviewing for Recruitment and Appraisal

38        Improving Personal Effectiveness

39        Influencing Skills

40        Interpersonal & Communication Skills

41        Leading and Managing Organizational Change

42        Leadership and Leadership Styles

43        Lateral Thinking

44        Leadership & Effective Team Building

45        Leadership, Empowerment, and Delegation

46        Leadership Development / Personal Growth

47        Managing Chaos Setting Priorities Under Pressure

48        Motivating & Increasing Work Productivity

49        Managing the Training Function

50        Market Research

51        Managing Multiple Tasks

52        Mentoring Skills

53        Motivating Your Staff for Better Performance

54        Managing and Working With Difficult People

55        Managing Training and Development

56        Mentoring, Coaching & Counselling

57        Mentoring and Instructor Training

58        Negotiation Skills

59        Office Management and Effective Administrators Skills

60        Personal Effectiveness

61        Project Planning Scheduling & Control

62        Problem Solving & Decision Making

63        Performance Management & Productivity Improvement

64        Presentation Skills

65        Procurement Management System

66        Public Speaking

67        Planning, Organizing & Control

68        Supervisory Management and Leadership Competencies

69        Supervision Skills

70        Self Development

71        Secretarial Excellence Skills

72        Secretarial Intermediate Skills

73        Secretarial Junior Skills

74        Strategic Training Needs Analysis, Evaluation & Implementation

75        Supervisory Leadership

76        Strategic Leadership

77        Supervisory Skills for New Managers

78        Telephone Skills

79        Team Work

80        The Key Skills of Training  Assessor

81        Time & Stress Management

82        Techniques for Interviewing, Testing and Effective Selection

83        Technical Report Writing Skills

84        Train the Trainer-Facilitation Skills

85        The 7 Habits

86        Team Building

87        Win-Win Negotiation Skills

88        Work Ethics

89        The Innate Directed Diet – 7 steps to reaching your ideal weight without dieting fads

90        S.O.S –  Save Our Spines – 10 daily postural & exercise essentials to optimize your back

91        The 4 B’s to Beating stress and Bringing Balance into your home and work life

92        Cracking the Kid Code – 5 techniques for transforming your child from school hater, to school appreciator

93        Emotional Self Suficiency Training

12.Project Management Courses

1          Advanced Construction Management, Contracting & Project Execution.

2          Construction Scheduling, Resources and Site Operations Planning.

3          Comprehensive Preparation for the Project Management Professional (PMP) Certificate (With Sample Exams).

4          Comprehensive Project Planning & Management: Route for Success

5          Capital Project Management, Economics & Cost Engineering

6          Contract Management

7          Contract Management Principles & Practices Course

8          Introduction to Project Management

9          Effective Risk Assessment & Management in Engineering Projects

10        Project Risk Management

11        Managing Projects

12        Project Management for Intermediate & Advanced Levels.

13        Preparation for the Project Management Professional (PMP) Certificate.

14        Quality for Project Engineer Course

15        Project Planning, Scheduling & Control

16        Project Management Essential

13.Supply Chain Management

1          Auditing Supply Chain

2          Driving Business Change Through People

3          Dangerous Goods Handling, Transportation and Storage

4          Introduction To Logistics 3- Days

5          Enabling Supply Chains Through E-Business

6          Management & Purchasing Strategies and Cost Reduction

7          Managing International Trade and Freight Forwarding

8          Performance drivers in the Supply Chain

9          Materials & Supply Chain Flows

10        Practical Forecasting

11        Practical Benchmarking

12        Practical Project Management

13        Practical Negotiating

14        Practical Spreadsheets Modelling

15        Practical Inventory Techniques

16        Purchasing : The A To Z Course

17        Purchasing Strategies ,Tactics and Cost Reduction

18        The Effective Inventory Manager

19        The Effective Distribution Manager

20        The Effective People Manager

21        The Effective Logistics Manager

22        The Effective  Transport Supervisor

23        The Effective Supply Chain Manager

24        Warehousing Management

25        The Effective Warehouse Manager

14.Finance & Accounting

1          Advanced Financial Statements Analysis

2          Advanced Accounting

3          Advanced Excel Applications in Business Analysis

4          Advanced Product Pricing & Market Strategy

5          Advanced Accounting & Finance

6          Balance Scorecard & Key Performance Indicator

7          Basic Accounting

8          Capital Recovery & Fixed Assests Valuation

9          Budgeting, Forecasting and Business Planning

10        Finance For Non-Finance Staff

11        Finance Basics

12        Fundamentals of Finance & Accounting

13        Finance For Non- Finance Mangers

14        Financial Planning and Control

15        Effective Budgeting and Cost Control

16        Financial Report Writting Analysis

17        Financial Decision Making

18        International Accounting Standards

19        Finance & Cash Flow Management

20        Purchasing Stratégies and Cost Reduction

21        Intermediate  Accounting

Contact Information

en_USEnglish
en_USEnglish